Tuesday, May 24, 2016


Turn off your device.- Run Odin.exe program.- Check these options: Auto Reboot, F.Reset Time- In case you have full firmware package with PIT file included then check Re.Partition option too.- Click on PIT button and select *.pit file- Now you should select the firmware files in the following order:

Bootloader: BOOTLOADER_T210xxxxxx_....tar.md5
PDA: _T210xxxxxx_....tar.md5
CSC: CSC_Oxx_T210Oxxxxxxx_....tar.md5

- To put your Galaxy Tab 3 7.0 into Download Mode follow these steps:Press and Hold Volume Down + Power for 5 seconds, And when you see the warning message relse them both.- Press Volume Up to enter the download mode.- Connect the device to your computer using the USB cable.- Wait until detects the phone and installs its USB drivers.- When your device is correctly detected then you will see its COM port at Odin's window 0:[COMxx]- At this step you are rdy to begin the update, Just click on Startbutton.- Odin will do the work for you, So wait for it.- After finishing the update process the device will be rebooted.- Disconnect the USB cable from your device.- Look at Odin's window and you should see PASS!


Android 4.1.2:- T210XXAMEQ / ODDAME6 India- T210XXAMES / OJVAME6 XSG United Arab Emirates- T210XXAMES / OJVAME6 XFA South Africa- T210XXAMEU / OJVAME7 TUR Tur

flasher::Odin307 - Download - 4shared

No comments:

Post a Comment